
How to Build a Wood Fence: Step-by-Step Guide
How to build a wood privacy fence in 8 steps: layout, post depth and spacing, concrete, rails, pickets, and gates, plus DIY material costs.
Free calculators that do the full takeoff, not just the square footage. Get a shopping list with prices, or turn it into a customer estimate if you do this for a living.
Framing, decking, railing, stairs
Wood or vinyl, gates, concrete
Cubic yards, bags vs bulk
Tons, cubic yards, base layer
Hardwood and lumber volume and cost
Gallons, primer, ceilings, supplies
Tiles, boxes, thinset, grout
Sheets, mud, tape, screws
Pavers, base, sand, edging
Pallets, slabs, topsoil
Blocks, caps, base, drainage
Slabs, footings, bags vs ready-mix
Every calculator ends with one button: turn the takeoff into a customer estimate in about 30 seconds.

How to build a wood privacy fence in 8 steps: layout, post depth and spacing, concrete, rails, pickets, and gates, plus DIY material costs.

Drywall costs $1.50 to $3.50 per sq ft hung and finished. See sheet prices by type, costs by room size and finish level, and a DIY materials list.

Tiling a bathroom floor costs $10 to $25 per sq ft, or $450 to $1,150 for a typical bathroom. See costs by size and tile type, plus DIY materials.

Sod costs $1.70 to $2.60 per sq ft installed, and a pallet runs $110 to $375. See prices by grass type and lawn size, plus DIY costs.

A retaining wall costs $20 to $50 per sq ft of face, about $6,300 on average. See costs by size and material, plus a DIY block wall materials list.

A paver patio costs $8 to $24 per sq ft installed. See prices by size and paver type, what adds to the cost, and a DIY materials list for a 12×16 patio.