Cost to Tile a Bathroom Floor (2026 Prices)

Having a pro tile a bathroom floor usually costs $10 to $25 per sq ft, or about $450 to $1,150 for a typical 5 x 8 ft bathroom (national average around $875). Labor alone runs about $5 to $10 per sq ft. Doing it yourself with porcelain tile, the materials for that same bathroom come to about $240, including backer board.

Count your boxes first. The free tile calculator works out tiles, boxes, thinset, grout, and backer board for your floor, with waste for the pattern you pick.

Cost by bathroom size

Bathroom floorAreaInstalled ($10 to $25/sq ft)
5 x 8 ft (full bath)40 sq ft$400 to $1,000
5 x 10 ft50 sq ft$500 to $1,250
8 x 10 ft80 sq ft$800 to $2,000
10 x 12 ft (primary bath)120 sq ft$1,200 to $3,000

Measure only the open floor. The area under a tub, shower, or vanity usually does not get tiled. Small jobs often have a minimum charge, so a tiny half bath may cost about as much as a full bath.

Tile prices by material

TileTypical material cost per sq ftNotes
Ceramic$2 and upBudget friendly, easy to cut
Porcelain$3 and upDenser and more water resistant. Slip-resistant versions add $1 to $2
Porcelain wood-look plank$10 to $30Long planks need a very flat floor
Marble$3 to $50Needs sealing, can scratch and etch
Slate and other stone$3 to $100Higher install cost, needs sealing

Many bathroom floors use ceramic or porcelain in the $2 to $10 range. Designer and handmade tile can cost far more.

What adds to the cost

  • Old floor removal: about $1 to $5 per sq ft. Old tile set in a mortar bed is the slowest to remove.
  • Backer board: about $5 to $6 per sq ft installed. Cement board or a membrane over the subfloor keeps the tile from cracking.
  • Subfloor repair: water damage around the toilet or tub is common in old bathrooms.
  • Toilet removal and reset: usually part of the job, sometimes billed separately.
  • Tile size and pattern: small mosaics, herringbone, and diagonal layouts take more time and waste more tile.
  • Heated floors: an electric mat under the tile adds materials, an electrician, and a thermostat.
  • Grout and sealing: confirm whether the quote includes them, especially for stone.

DIY bathroom floor tile: materials only

Here is what the tile calculator lists for a 5 x 8 ft floor in 12 x 24 in porcelain, offset pattern, with cement backer board:

  • 3 boxes of tile (45 sq ft with waste)
  • 1 bag of thinset mortar
  • 1 bag of sanded grout
  • 3 sheets of cement backer board (3 x 5 ft)
  • Spacers or leveling clips
  • About $240 in materials at $3 per sq ft tile

Add backer board screws and tape, a tile saw (buy or rent), trowels, and a mixing paddle. For a 10 x 12 ft floor, the same tile comes to about $520 in materials before backer board.

How to save money

  • Do the demolition yourself: pull the toilet, baseboards, and old flooring before the installer arrives.
  • Pick a standard size like 12 x 24 in and a straight or offset layout.
  • Check the overstock or closeout aisle, but buy 10 to 15% extra from one batch, since later batches can vary in color.
  • Bundle the floor with a tub surround or backsplash so you pay one setup fee.

FAQ

How much does it cost to tile a small bathroom floor?

About $400 to $1,000 for a 40 sq ft floor installed, or about $240 in materials to do it yourself.

How much do tile installers charge per square foot?

Usually $5 to $10 per sq ft for labor, more for stone, mosaics, and complex patterns.

How much extra tile should I buy?

About 10% for a straight layout, 10 to 15% for an offset layout, and 15% or more for diagonal or herringbone. Keep a box for future repairs.

Can I tile over existing tile?

Sometimes, if the old tile is flat, well bonded, and the added height works at the door and toilet. Most pros prefer to remove it.

Sources

Leave a Comment