Deck Calculator

Full framing takeoff: joists, beams, posts, footings, decking, fasteners, railing, and stairs. Then price it out.

How it's calculated

  • Joists run from the house out, spaced on center
  • Beam sits 1 ft in from the edge (cantilever)
  • Posts are no more than 8 ft apart along each beam
  • Deck boards: 5.5" wide with 3/16" gaps, plus 5% waste
  • Stairs: 7.5" max rise, 10.5" treads

Before you buy

  • Call 811 before digging footings
  • Confirm frost depth with your county
  • Use hot-dip galvanized or coated hardware with treated lumber
  • Most attached decks need a permit and inspection

Estimates only. Check local building codes, span tables, and frost depth before you build. Prices are national averages and editable.

How much material do I need for a deck?

A deck materials list has three layers: the foundation (footings and posts), the framing (beams, joists, ledger, and hardware), and the surface (deck boards, fasteners, railing, and stairs). Most online deck calculators only count deck boards. The calculator above does the full framing takeoff and prices every line.

How the deck calculator works

  • Joists run from the house out to the beam, spaced 12, 16, or 24 in on center. Count = (deck length x 12 / spacing) + 1.
  • Joist size comes from the span: the distance from the ledger to the beam. The calculator uses a typical Southern Yellow Pine #2 table from the American Wood Council’s DCA 6 guide.
  • Beams are 2-ply 2×10 or 2×12, set 1 ft in from the edge so the joists cantilever slightly.
  • Posts are 6×6, no more than 8 ft apart along each beam, each on a concrete footing.
  • Deck boards are 5.5 in wide with a 3/16 in gap, plus 5% waste.

Deck joist span chart

Typical maximum joist spans for Southern Yellow Pine #2, 40 psf live load (from DCA 6). Always confirm with your local building department.

Joist size12 in on center16 in on center24 in on center
2×611′ 10″9′ 11″8′ 2″
2×815′ 8″13′ 1″10′ 8″
2×1018′ 0″16′ 2″13′ 2″
2×1218′ 0″18′ 0″15′ 4″

Composite decking usually requires joists at 16 in on center or closer, and 12 in when the boards run on a diagonal.

Example: 12 x 16 deck materials list

A 16 ft wide deck that sticks out 12 ft from the house, 3 ft off the ground, attached with a ledger, joists at 16 in:

  • 13 joists, 2×8 x 12 ft (11 ft span)
  • 1 ledger and 1 rim joist, 2×8 x 16 ft
  • 1 beam, two 2×12 x 16 ft plies
  • 3 posts, 6×6 x 8 ft, on 3 footings (about 12 bags of 80 lb concrete)
  • About 30 deck boards, 5/4×6 x 16 ft, including stair treads
  • 13 joist hangers, 13 hurricane ties, ledger screws, and 2 boxes of deck screws
  • About 36 ft of railing and a 4 ft wide set of stairs with 5 risers

Enter your own size above to get a priced list you can edit.

Pressure treated vs composite decking

Pressure treatedComposite
Material costLowestAbout 2 to 3 times more
MaintenanceClean and seal every 1 to 3 yearsWash once or twice a year
Lifespan10 to 20 years with care25 to 30+ years
FastenersCoated deck screwsHidden clips or color-matched screws

The framing is pressure-treated lumber either way. Composite is only the surface.

Deck building tips

  • Most attached decks need a permit. Call your building department before you buy lumber.
  • Call 811 before you dig footings so buried lines are marked.
  • Footings must go below your local frost line.
  • Use hot-dip galvanized or coated hardware rated for treated lumber.
  • Flash the ledger so water cannot get behind it. Ledger failures are the top cause of deck collapses.
  • Decks more than 30 in above the ground need a guardrail at least 36 in tall in most codes.

Deck calculator FAQ

How many joists do I need for a 12×16 deck?

With joists running the 12 ft direction at 16 in on center, a 16 ft wide deck needs 13 joists: (16 x 12 / 16) + 1.

How far can a 2×8 joist span?

About 13 ft 1 in at 16 in on center for Southern Yellow Pine #2. At 12 in on center it can go about 15 ft 8 in.

How many deck boards do I need?

Divide the deck depth in inches by 5.69 (a 5.5 in board plus a 3/16 in gap) to get the number of rows, multiply by boards per row, and add 5 to 10% for waste.

How far apart should deck posts be?

Typically 6 to 8 ft apart along the beam. Closer posts let you use a smaller beam.

How many bags of concrete per deck footing?

A 12 in diameter footing 36 in deep holds about 2.4 cubic feet, which is four 80 lb bags.

🛒 Recommended Decking Materials

1. UltraShield Naturale 1 ft. x 2 ft. Quick Deck Outdoor Composite Deck Tile

Easy-to-install composite deck tiles with a realistic wood grain finish. Ideal for patios, balconies, and rooftops
View on Amazon

2. IDZO Wood Plastic Composite Deck Tiles Set of 10

Sustainable FSC-certified composite decking that resists rust, water, and weather. Perfect for DIY projects
View on Amazon


🔩 Recommended Decking Fasteners

1. FastenMon #10×2 Stainless Steel Deck Screws (100 PCS)

Made from premium 304 stainless steel, these screws offer exceptional corrosion resistance, ensuring your projects are rust-free.
View on Amazon

2. DeckWise #8×2-1/2″ Stainless Steel Trim-Head Deck Screws

High-quality 305-grade stainless steel screws designed for hardwoods and composite decking material.
View on Amazon


🧱 Recommended Joist Hangers

*1. 316 Stainless Steel Joist Hangers JUS26 LUS26 Deck Framing 2 x 6

Durable 316 stainless steel joist hangers ideal for forming the floor on decking applications.
View on Amazon

*2. Face Mount 2×6 Joist Hangers with Galvanized Finish (50 Count)

20-gauge steel brackets with galvanized finish for secure beam connections. Easy DIY installation.
View on Amazon


*Note: The above links are affiliate links. If you choose to purchase through them, we may earn a small commission at no additional cost to you.